03 9762 8800
Select Page

HEATER CONTROLLERS

AQUAHEAT

The AQUAHEAT is a pump controller that controls the water flow through heat pumps or gas heaters when the water temperate is below the desired temperature limit (and is within the required run times). A pump sampling period setting allows the pump to stop for this time period once the desired temperature limit is achieved, after the elapsed time the pump will then automatically run for 3 minutes to obtain an accurate temperature, should heating be required then the pump will continue to run, if no heating is required the pump will stop and the last accurate temperature will be displayed until the next sample period. A 1st HEAT feature allows the controller to heat the pool until the desired temperature is reached, the controller then reverts to time-clock automatic operation. 

AQUAHEAT 5 RO

Heat Pump Circulating Pump Control- heating period time clock, adjustable sampling times after limit .

AQUAHEAT 5 A

Heat Control- heating period time clock, adjustable sampling times after limit – Backlit LCD

AQUAHEAT 5 TC

Auto Sampling, Aux Heater and Temperature Control- Filter Pump Override- Backlit LCD

AQUAHEAT 5 RO -I

Heat Pump Circulating Pump Control- heating period time clock, adjustable sampling times after limit .

AQUAHEAT 5 RO-S

Heat Control- heating period time clock, adjustable sampling times after limit – Backlit LCD